Pneumatic Solenoid Valves Manufacturer - Kao Lu
Product Serial:Type 600
Inquire
Share
Product Description

The upper portion of the guide signal pressure acting on the upper portion of the diaphragm and the diaphragm support under the secondary pressure on the varying proportions, if this same two diaphragm strength was 1: 1. The valve allows the secondary pilot pressure signal down to 4 ± 1psi, which is actually to be in a range -3psi + 5psi to adjust the output pressure 500X zero pressure and high flow rates can be obtained.

Product Feature

Control Charts:

Product Specification
Input-output ratio 1: 1 1: 3 1: 6
Flow: SCFM (m3 / hr)
(100 psig supply pressure; 20 psig output)
50 (76.5) 50 (76.5) 50 (76.5)
Overflow Flow: SCFM (m3 / hr) 12 (25.5) 12 (25.5) 10 (17.0)
Sensitivity: inch (cm) 0.25 (0.64) 0.75 (1.9) 1.50 (3.8)
Ratio Accuracy:% of full scale output 1.0 1.25 2.0
Zero error:% full scale output 2.0 2.25 3.0
50 psig pressure for change impacts 0.1 psig 0.3 psig 0.6 psig
Maximum supply pressure: psig (kPa) 250 (1750) 250 (1750) 250 (1750)
Signal Maximum Pressure: psig (kPa) 150 (1034) 50 (344) 25 (72)
Temperature -40 ~ 71 ℃ -40 ~ 71 ℃ -40 ~ 71 ℃

Specification Table:

model Ratio (Signal: Output) Dental mouth (NPT)
600-BA 1: 1 1/4 "
600-CA 1: 1 3/8 "
600-BC 1: 3 1/4 "
600-CC 1: 3 3/8 "
600-BD 1: 6 1/4 "
600-CD 1: 6 3/8 "