Product Category Selection
![Stepper-Controlled Proportional Valve 0-65L/min Stepper-Controlled Proportional Valve 0-65L/min](/upload-files/products/158/FC_PM.jpg)
Stepper-Controlled Proportional Valve 0-65L/min
FC series proportional liquid and gas flow control valve provides high precision flow control of liquid and gas.
Repeatability can reach as high as 0.1% F.S with extremely low hysteresis. FC20 series proportional needle valve can reach flow rate up to 65 L/min (2.3 SCFM) at 87 psig inlet pressure.
This valve is used for dosing, that can dispense as low as 1 mL of water. Takes 0-10V, 4-20mA or RS85 signal to change orifice. All models can customize wet material to stainless steel, consult a factory for customization.
![Stepper-Controlled Proportional Valve 0-230L/min Stepper-Controlled Proportional Valve 0-230L/min](/upload-files/products/159/FC_PM.jpg)
Stepper-Controlled Proportional Valve 0-230L/min
FC series proportional flow control valve provides high precision flow control of liquid and gas.
Repeatability can reach as high as 0.1% F.S with extremely low hysteresis. FC120 series proportional needle valve can reach flow rate up to 230 L/min (8.1 SCFM) at 87 psig inlet pressure.
FC120 series precision flow control valve can reach a life time of 10 million cycles of full open to full closure. Takes 0-10V, 4-20mA or RS85 signal to change orifice.
![Stepper-Controlled Proportional Valve 0-400L/min Stepper-Controlled Proportional Valve 0-400L/min](/upload-files/products/160/FC_PM.jpg)
Stepper-Controlled Proportional Valve 0-400L/min
The valve provides high precision flow control of liquid and gas.
Repeatability can reach as high as 0.1% F.S with extremely low hysteresis. FC300 series proportional needle valve can reach flow rate up to 400 L/min (14.2 SCFM) at 87 psig inlet pressure.
Takes 0-10V, 4-20mA or RS85 signal to change orifice. All models can customize wet material to stainless steel, consult factory for customization.
![Stepper-Controlled Proportional Valve 0-1200L/min Stepper-Controlled Proportional Valve 0-1200L/min](/upload-files/products/191/FC-Series.jpg)
Stepper-Controlled Proportional Valve 0-1200L/min
FC series proportional water and gas flow control valve provides high precision flow control of liquid and gas Repeatability can reach as high as 0.1% F.S with extremely low hysteresis.
FC1500 series proportional needle valve can reach flow rate up to 3000 L/min (106 SCFM) at 150 psig inlet pressure. Turndown ratio can reach up to 1: 400. Selection of flow sensors available for feedback signal.
FC20 series proportional control water flow valve is used for dosing, that can dispense as low as 1 mL of water. FC120 series valve can reach a life time of 10 million cycles of full open to full closure.
Takes 0-10V, 4-20mA or RS85 signal to change orifice. All models can customize wet material to stainless steel, consult factory for customization.
![Electronic Flow Control Valve 0-2100L/min Electronic Flow Control Valve 0-2100L/min](/upload-files/products/6/FC-1500_PM-1500.jpg)
Electronic Flow Control Valve 0-2100L/min
Electronic flow control valve (EFC) is used to regulator flow rate of liquid or gas. The FC series electronic flow regulator has the advantage of high flow (106 scfm), high repeatability ( 0.1% F.S), high turn down ratio (1:400)
This electronic air flow control valve can be used in pair with a flow sensor for feedback control to achieve extremely high flow rate control precision. FC series valve is driven by PM series driver.
The driver provides micro-stepping resolution to the valve to achieve accurate flow control. The driver accepts 0-10V, 4-20mA or RS85 signal. All models can customize wet material to stainless steel, consult factory for customization.
![Stepper-Controlled Proportional Valve 0-5000L/min Stepper-Controlled Proportional Valve 0-5000L/min](/upload-files/products/201/FC-3000.jpg)
Stepper-Controlled Proportional Valve 0-5000L/min
The type of valve is mainly designed for providing high precision flow control of liquid and gas.
Repeatability can reach as high as 0.1% F.S with extremely low hysteresis. FC3000 series proportional needle flow control valve can reach flow rate up to 5000 L/min (176.6 SCFM) at 145 psig inlet pressure.
Selection of flow sensors available for feedback signal. Takes 0-10V, 4-20mA or RS85 signal to change orifice. All models can customize wet material to stainless steel, consult factory for customization.
![MEMS Gas Mass Flow Meter 0-1000L/min MEMS Gas Mass Flow Meter 0-1000L/min](/upload-files/products/312/KMF1000.jpg)
MEMS Gas Mass Flow Meter 0-1000L/min
KMF1000 series digital gas mass flow meter is made of micro- electromechanical system (MEMS) flow sensing chip, suitable for a variety of purposes of clean, relatively dry nature of the small flow gas measurement and process control, unique packaging technology makes the product to meet the different ranges of flow measurement, to ensure high sensitivity, high reliability, high stability and low cost.