Type ICS
Conductivity Sensor
- minimal dead space
- temperature-compensated evaluation electronics
- materials and constructional design especially optimised for food applications
- other material for seal
SHARE
| GENERAL | ||
|---|---|---|
| Constructional design | Ceramic conductivity measuring cell | |
| Product name | Conductivity Sensor | |
| Product type | ICS-958P3-... | |
| Nominal diameter | DN 4 | |
| Connection | ELSA push-in connectors for pipe/tube OD 6 | |
| Ambient temperature | 0°C to + 60°C | |
| Medium temperature | 0°C to + 140°C | |
| Medium viscosity | up to approx. 35 mm²/s | |
| Body material | PPSU (KTW- NSF- certified) | |
| Measuring cell material | Al₂O₃Pt, glass | |
| O-ring material | FKM (FDA-compliant) or EPDM (NSF-, KTW-approved) | |
| Mounting method | using spring clip, internal widthØ 30-32 (not included in scope of supply) | |
| Mounting position | Preferably upright | |
| Approval | NSF/ANSI 169 | |
| PNEUMATIC - HYDRAULIC | ||
|---|---|---|
| Nominal pressure | PN 16 | |
| Pressure range | Technical vacuum up to maximum allowable operating pressure OP in accordance with the specifi cation table | |
| Flow rate | Kv-value in accordance with the specifi cation table | |
| Medium | Gases or liquids which do not corrode the materials specifi ed | |
| ELECTRIC | ||
|---|---|---|
| Supply voltage | 9 to 36 VDC | |
| Conductivity output signal | 0 to 5 VDC (linear over the entire measurement range) | |
| Temperature output signal | 0 to 5 VDC (linear over the entire measurement range) | |
| Electrical Connection | 4-pole screened cable 0.75 m (LiYCY 4xAWG24) | |
| Protection class | IP65 | |
| MEASURING CELL | Conductivity | Temperature |
|---|---|---|
| Measuring range | 0.2 to 20 mS/ cm | 0 to 140°C |
| Accuracy | ± 2% F.S. | ± 1°C |
| Temperature error | ± 1% F.S. | - |
| Response time | < 1 s | < 1 s |