Air Pressure Ratio Regulator (0-103bar)

QKL-B1T, QKL-BPF

Air Pressure Ratio Regulator (0-103bar)

  • B1T Electronic Pressure Regulator
    Provides an air pilot signal to the dome of the air volume booster. By controlling pressure to the top of the diaphragm, we control pressure out of the volume booster.
  • Air Pressure Ratio Regulator
    KaoLu's high pressure ratio regulator is mostly used in high pressure environment, in which the users are used to using mechanical air pressure regulator. Using our high pressure ratio regulator assembly, it is now possible to electronically regulate high pressure from potentially hazardous environment using control such as RS485-modbus serial communication. Using the dome-loaded method controlled by our electronic pressure regulator, the users can achieve pressure up to 3000 psig (210 bar) with resolution up to 5 psig (0.3 bar). Moreover, our high pressure ratio regulator not only works with air, the newly developed ratio regulator is compatible with different fluids such as water and high temperature steam pressure.

There is a choice of single loop feedback or external sensor feedback. With single loop feedback where we ensure the dome loaded pilot air is the same, the drawback is that the output pressure from the high pressure ratio regulator is not monitored. The accuracy is typically about 2-3% with this method. In a different scenario where an external sensor was mounted to the ratio regulator or mounted remotely downstream of the high pressure ratio regulator, we can ensure high accuracy to be achieved.

Please click on below link for application:
Tire Curing

Type Proportional Pressure Regulator QKL B1T
Input Signal 4-20mA / 0-10V / RS485
Monitor Output 1 5V / 0 10V / 4 20mA
Power Supply DC24V (≦4W)
Response 0.8S
Type Air Pressure Rat io Regulator
Output Ratio 1:20
Model QKL BPF
Port G1/4"
Max. Supply Pressure 2500 psi
Max. Signal Pressure 75 psi
Max. Output Pressure 1500 psi
Hysteresis 0.5% F.S.
Repeatability 1% F.S.
Accura cy 1 2% F.S.
Flow Coefficient CV 0.06