FC-300, PM-300
Stepper-Controlled Proportional Valve 0-400L/min
SHARE
Proportional Flow Control Valve consists of PM series driver and FC series proportional flow valve. With an input signal either through analogue or digital, the needle inside the proportional valve moves proportionally to the signal. This series is able to control the flow rate of air and liquid with high resolution, high accuracy, and high repeatability. It is developed for industries that require a high degree of adjustment in flow rate.
Series PM driver provides series FC valve with the required power and control signal (step and direction). It controls the step of a bipolar stepper motor with an analogue signal (0-10 VDC/4-20mA/RS485 Modbus).
PM
| Input signal | VDC 0-10V / 4-20mA / RS485 |
|---|---|
| Supply | DC24V (≦12W) |
| Indicator LED Status (* with Encoder function ) |
on/off (LED on is motor running) on/off (LED off is motor stopping) on/off (LED flashing is motor error) ＊error/null (LED on is encoder error) ＊error/null (LED off is encoder normal) |
| Encoder Resolution | 1.587×10-3 mm |
| Motor Status output | Sink 50mA |
| Temp. Range (Operating) | 0-60℃ |
| Cable Length | 1 meter, consult for longer cable |
FC
| Model | FC-300 |
|---|---|
| Valve Type | 2-Way Proportional Needle valves |
| Port Size | G 1/8" |
| Medium | Compatible gases and liquids |
| Pressure Range | -1~7bar |
| Flow Range of air | 0~400L/min@6bar |
| Flow Range of water | 0~8L/min @6bar |
| Repeatability | ±0.1% F.S. |
| Flow Resolution | 0.3L/min@3bar |
| Temperature Range | 0~84°Ｃ |
| Full Stroke Time | 2 sec |
| Body material | Aluminum or Stainless steel |
| Seals | Viton or FFKM |
| Ingress Protection | IP52 |